實際上自動變速箱油與機油的更換是存在很大的區別的,變速箱油并不像機油一樣,把舊油放一放,再添新油即可。這種換油手法,等同于沒換。因?yàn)楦鼡Q不好,波箱內的變速箱油會污染新油,油內雜質仍“活躍”在波箱內。下面
濟南自動變速箱維修廠家講一講變速箱油更換不干凈或者說波箱清洗不到位會給變速箱帶來什么影響。
In fact, there is a great difference between the automatic transmission oil and the oil change. The transmission oil is not the same as the oil. Just put the old oil away and add new oil. This oil change method is equivalent to not changing. Because of poor replacement, the transmission oil in the gearbox will pollute the new oil, and the impurities in the oil are still "active" in the gearbox. Next, the Jinan automatic transmission maintenance manufacturer will talk about the impact on the transmission if the transmission oil is not replaced or the gearbox is not cleaned properly.
大家都知道,波箱在運作時,變速箱油是跟著變速箱在不斷流動的。通過油泵進入液壓閥中的主調節閥,又經過主調節閥進入液力變矩器,在進入液力變速器之前還會在液壓閥體的鎖止調壓閥進行調節,接著從液力變矩器進入散熱器,后通過回油管再次回到波箱內??梢哉f(shuō),波箱在運作時,變速箱油會經過波箱的所有“角落”。
As we all know, during the operation of the gearbox, the transmission oil flows continuously with the gearbox. It enters the main regulating valve in the hydraulic valve through the oil pump, and then enters the hydraulic torque converter through the main regulating valve. Before entering the hydraulic transmission, it will be adjusted by the lock up regulating valve of the hydraulic valve body, then enters the radiator from the hydraulic torque converter, and then returns to the gearbox through the oil return pipe. It can be said that during the operation of the gearbox, the transmission oil will pass through all "corners" of the gearbox.
波箱內部的機械元件,在運作過程中難免會產生一些雜質,比如說離合器片的摩擦碎末等等。而這些摩擦碎末會在波箱運作時,隨著變速箱油進行流動,污染液力變速箱器、散熱器、電磁閥等等。尤其像液力變矩器內部有許多的褶皺部位,比如鎖止活塞反面的減震器內側,這些地方都是藏匿雜質的“好地方”。
The mechanical components inside the gearbox will inevitably produce some impurities during operation, such as friction debris of the clutch plate. These friction debris will flow with the gearbox oil during the operation of the gearbox, polluting the hydraulic gearbox, radiator, solenoid valve, etc. In particular, there are many folds in the hydraulic torque converter, such as the inner side of the shock absorber on the opposite side of the locking piston. These places are "good places" for hiding impurities.

所以,像更換機油的方式更換變速箱油,是無法達到更換標準的。舊油無法更換完全,雜質還藏匿在各元件之內,如此更換變速箱油等同于沒有更換。
Therefore, it is impossible to replace the transmission oil by changing the oil. The old oil cannot be completely replaced, and the impurities are still hidden in the components. Thus, replacing the transmission oil is equivalent to not replacing it.
另外,自動變速箱保養除了要定期更換變速箱油外,清洗自動變速箱也是不可或缺的。自動變速箱內部的雜質,除了元件磨損外,有時候變速油變質比如說形成油膏等,都容易附著在元件上。單單更換變速箱油有時候并無法保證波箱內部環境干凈,因此在自動變速箱維修工作時,零件的清洗非常重要。
In addition, in addition to changing the transmission oil regularly, cleaning the automatic transmission is also indispensable. The impurities in the automatic transmission are easy to adhere to the components except for the wear of the components, and sometimes the transmission oil deteriorates, such as the formation of oil paste. Changing the transmission oil alone sometimes cannot guarantee the internal environment of the gearbox to be clean. Therefore, it is very important to clean the parts during the maintenance of the automatic transmission.
有的變速箱經常出現故障,更換新的液壓閥體也無法治根,這主要是因?yàn)殡s質已經進入了自動變速箱的液壓循環系統中,就像得了潛伏性病毒,沒有明確病源,卻故障不斷。像這種情況就必須清潔整個液壓系統回路,才能根治故障。更多相關信息的獲取就來我們網站
http://njzhuiri.cn咨詢了解吧。
Some gearboxes often fail, and replacement of new hydraulic valve bodies can not cure the root cause. This is mainly because impurities have entered the hydraulic circulation system of automatic gearboxes. It is like a latent virus. There is no clear source of the disease, but the failure continues. In this case, it is necessary to clean the entire hydraulic system circuit to eradicate the fault. For more information, please visit our website http://njzhuiri.cn Consult and understand.