1、自動變速箱漏水油。能夠大修變速箱，更換密閉性電子元器件。2、掛檔后松剎車踏板沒動，汽車加油能夠發展，但伴隨著明顯沖擊感，能夠大維修變速箱件。3、車子SPT燈與故障指示燈燈更替閃動，能夠更換油壓機真空閥。4、換檔晚或闖車，能夠清洗節氣門體，做節氣門匹配。5、自動變速箱高速后不換檔，能夠更換感應器。

1. The automatic transmission is leaking water and oil. Capable of overhauling the gearbox and replacing sealed electronic components. 2. After shifting gears and releasing the brake pedal without moving, the car can develop with refueling, but with a noticeable impact, it can undergo major repairs on transmission components. 3. The vehicle's SPT light and fault indicator light flash alternately, allowing for the replacement of the hydraulic press vacuum valve. 4. Late shifting or driving can clean the throttle body and perform throttle matching. 5. The automatic transmission does not shift gears at high speed and can replace sensors.

1、自動變速箱漏水油

1. Automatic transmission leaking water and oil

故障分析：不一樣型號的變速器擁有不同的漏水位置。漏水的主要原因是密閉性電子元器件密閉性實際效果欠佳造成，有時候還會由于零部件上存有黑點、生銹等情形造成漏水。漏水如未妥善處理，變速器將長期性缺油運作，進而更進一步造成其內部結構嚴重?fù)p壞。

Fault analysis: Different models of transmissions have different leakage locations. The main reason for water leakage is the poor sealing effect of sealed electronic components, and sometimes it can be caused by black spots, rust, and other conditions on the components. If water leakage is not properly handled, the transmission will operate for a long time without oil, which will further cause serious damage to its internal structure.

維修方法：大維修變速箱，更換密閉性電子元器件。

Repair method: Perform a major maintenance on the gearbox and replace the sealed electronic components.

2、掛檔后松剎車踏板沒動，汽車加油能夠發展，但伴隨著明顯沖擊感

2. After shifting gears and releasing the brake pedal without moving, the car can develop with refueling, but with a noticeable sense of impact

故障分析：通常是變速器內部結構承擔一檔油道工作任務的電子元器件發生泄壓狀況。該常見故障如一直不修補，將更進一步造成變速器的油壓機真空閥毀壞，進而引起變速器內部結構嚴重?fù)p壞。

Fault analysis: Usually, the electronic components responsible for the first gear oil passage work in the internal structure of the transmission experience pressure relief. If this common fault is not repaired continuously, it will further cause damage to the vacuum valve of the hydraulic press of the transmission, leading to serious damage to the internal structure of the transmission.

維修方法：大維修變速箱，更換一檔相應油道電子元器件。

Repair method: Perform a major maintenance on the gearbox and replace the electronic components of the corresponding oil passage in the first gear.

3、車子SPT燈與故障指示燈更替閃動

3. The car's SPT light and fault indicator light are flashing and changing

故障分析1：油壓機真空閥毀壞，造成變速器內部結構無法創建正常運轉油壓機(不增壓)。該常見故障務必妥善處理，不然將于短時間造成變速器內部結構比較嚴重?fù)p壞。

Fault analysis 1: The vacuum valve of the hydraulic press is damaged, causing the internal structure of the transmission to be unable to create a normal operating hydraulic press (without boosting). This common malfunction must be handled properly, otherwise it will cause serious damage to the internal structure of the transmission in a short period of time.

維修方法：更換油壓機真空閥。

Repair method: Replace the vacuum valve of the hydraulic press.

故障分析2：通常是由于變速器外圍傳感器故障造成，比如檔位開關（一鍵啟動開關、輸入、輸出轉速傳感器、油溫傳感器、節氣門傳感器感應器等。

Fault analysis 2: It is usually caused by a malfunction in the peripheral sensors of the transmission, such as gear switches (one key start switch, input and output speed sensors, oil temperature sensors, throttle sensor sensors, etc.).

維修方法：更換相應感應器

Repair method: Replace the corresponding sensor

故障分析3：E1、E2離合片燒損。該2組磨擦片承擔變速器前進擋倒車檔的工作任務，燒損后車子創建駕駛，自動變速箱油會有明顯嗆鼻味兒，該常見故障一樣務必對變速器開展大修理。

Fault analysis 3: E1 and E2 clutch plates burned out. These two sets of friction plates are responsible for the work task of forward and reverse gears of the transmission. After being burned, the car will be driven and the automatic transmission oil will have a noticeable pungent smell. This common fault is also necessary to carry out major repairs on the transmission.